While naturally occurring, mold can become a serious problem within a home. Mold spores float through the air and embed themselves in organic material in a damp, oxygen-rich environment. It will then spread quickly and cause health concerns like respiratory issues, allergic reactions, and many more serious conditions.

Building material manufacturers now produce mold-resistant drywall to combat this dangerous but all-too-common substance. The material prevents mold from attaching to its surface, effectively keeping mold at bay—even in moisture-rich environments. 

What is mold-resistant drywall?

Mold-resistant drywall is a building material composed of a gypsum core and a non-organic facing material. This material prevents mold spores from attaching and embedding themselves in the wallboard, and doesn’t provide the organic material mold requires to spread. This differs from standard drywall which has a paper face—just the sort of organic material mold thrives on. 

In general, mold-resistant drywall costs roughly 30 to 50 percent more than a sheet of standard drywall. While this is an added expense, it’s only necessary to install mold-resistant drywall in certain areas and rooms within the home, such as bathrooms and laundry rooms—areas with the potential for a lot of humidity. Should a leak or high humidity condition occur in those areas, the added cost may be worth it. 

How does mold-resistant drywall work?

Mold-resistant drywall works by creating an inhospitable environment for mold. Even if the surface of the drywall becomes damp due to moisture or humidity within the room, mold can’t embed or feed on this type of drywall. 

Mold-resistant drywall contains the same core as standard drywall, made from non-organic, non-combustible gypsum. Gypsum is a mix of calcium sulfate dihydrate and water, and these materials are pressed into long, rigid sheets before being covered with paper facing, fiberglass mesh, or wax-embedded paper. 

It’s the facing material that makes the difference. There are two materials used for this purpose: fiberglass and a wax coating over a slightly thicker paper face. The fiberglass is entirely non-organic, while the wax aims to prevent moisture and mold spores from penetrating the face of the drywall and growing on the paper. The wax is actually moisture-resistant, not mold-resistant, and it’s commonly known as “green board.”

What’s the difference between mold-resistant drywall and green board?

Mold-resistant drywall and green board—a water-resistant type of drywall—are not the same. The fiberglass facing on mold-resistant drywall is much more effective at preventing mold growth due to the lack of any organic materials. Conversely, green board’s moisture resistance comes from its paper facing’s high wax content, but it still contains organic materials in the way of paper on the front and back of the sheet. 

In the event of a flood, mold-resistant drywall should fair well. However, green board, which is actually just moisture-resistant on its front (there isn’t any wax behind), will not prevent moisture from penetrating the back of the sheet and creating the ideal conditions for mold. If true mold resistance is the goal, green board is not the answer.

To solve this dilemma, most drywall manufacturers now produce mold- and moisture-resistant drywall in one product. However, no manufacturer makes waterproof or mold-proof drywall—it just doesn’t exist.

How to install mold-resistant drywall

Installing mold-resistant drywall involves almost the same process as standard drywall . Sheets of drywall are measured, scored, snapped, and cut to fit the wall. The installer then screws or nails through the face of the drywall and into the bare studs behind. Once all sheets are hanging on the framing, the joints need taping and the fastener holes need mud.

But, there’s one important point to consider when taping mold-resistant drywall: Use fiberglass mesh tape for the joints whenever possible. Using paper tape provides the organic material that mold can attach to. However, it may be necessary for the corners and joints between walls and ceilings. 

Where to use mold-resistant drywall

It’s not necessary to cover an entire home’s interior with mold-resistant drywall, but there are some areas where it’s worth considering. Areas that experience high moisture levels or excessive humidity due to appliances, fixtures, or environmental conditions can benefit from mold-resistant drywall.

Consider using mold-resistant drywall in kitchens, bathrooms, laundry rooms, mudrooms, and similar spaces where moisture is constantly present. Spaces around any appliance or fixture that uses water or creates water through condensation (like an air conditioner or refrigerator) might be worth using mold-resistant drywall when practical. 

It’s also worth considering using mold-resistant drywall in basements or crawl spaces where mold is likely to grow. These spaces are often warm, dark, and moist, making them the prime environment for mold and mildew growth. 

Final thoughts

Areas and rooms prone to high levels of humidity and moisture can benefit from mold-resistant drywall. While this material is more expensive than standard drywall, its resistance to mold means it can help prevent unhealthy conditions from developing in a home. That protection alone can make investing in this building material well worth the price. 

MT Copeland offers video-based online classes that give you a foundation in construction fundamentals with real-world applications, like drywall finishing . Classes include professionally produced videos taught by practicing craftspeople, and supplementary downloads like quizzes, blueprints, and other materials to help you master the skills.

Build Smarter

Get the latest updates about new courses, special trainings, resources, and more.

20% OFF

your first purchase

*Terms & Conditions apply



友情链: 2022IM电竞官网首页 im电竞比赛延期 在线登录 | im电竞体育信誉-im电竞平台官网网 在线登录 | im电竞注册_im电竞官方app - 网页 | im电竞竞猜官方网站-im电竞的官网登录 _ 在线投注 | im电竞直播平台_im体育电竞登录 在线登录入口 | 新IM电竞中国官方入口_亚博im电竞取款,官网平台 | im电竞竞猜~im电竞登陆中心,亚洲官网 |